|
2008
Chemung Speedrome Rules
Click
On Division
New
Rear Bumper Rules for Weekly Modified
& Modified Lite Divisions - Click Here For More Info
Click Here for
the Crate Engine Price List
GENERAL RULES
1. KNOWLEDGE OF
RULES: All competitors should know the rules for the
division. Along with the following:
2. ONE WAY RADIOS:
One-way radio on the track frequency is required,
but no other radio communication from anyone outside
the car, to the driver, is allowed. Track frequency
:
3. DRIVING SUITS
& HELMETS -1 piece fireproof suits only. Helmet
must be full face and Snell 95 or newer. Competitors
without a Nomex® lined helmet will be required to
wear a Nomex® head sock. 2-layer fire suit is
recommended, 1 layer fire suits must wear Nomex®
underwear. Fireproof gloves of at least single layer
also mandatory. Any fire suit, gloves, helmet, or
shoes that Tioga Officials find unsafe will result
in not being able to race until replaced.
4. SAFETY: Only
safety crew, wrecker crew and track officials will
be allowed on the track in the event of an accident.
Any crew member on the track without permission will
result in suspension of the crew member.
5. Drivers assume the
responsibility for action and conduct of his/her pit
crew and all members of his race team. Verbal or
other abuse of any type of official, employee, other
participants and /or patrons will not be tolerated.
Steps will be taken to do whatever is necessary to
maintain a trouble-free atmosphere at the Chemung
Speedrome
6. No member of a
race team-driver, owner, sponsor, crew or anyone
affiliated with the said team may enter the scoring
tower unless receiving permission. Failure to abide
by this can result in a fine or suspension of the
driver.
7. Use of
intoxicating beverages or drugs before entering pits
infield or while in attendance until the last event
is complete. Will result in the person being
suspended from going into the infield.
8. TIRE SOFTENER:
Tires that have been softened or altered in any way
will result in the following penalties.
a. First offense: 4
weeks suspension and loss of points.
b. Second offense:
1-year suspension.
9. OIL PAN
INSPECTION: All divisions must have sight hole in
oil pan for inspections required on the left side of
the oil pan. The inspection hole must be a minimum
of 1 ¼ inch diameter. It must be 9 ½ inches from
the rear block face to the center line of the
inspection hole or 4 ½ inches from the front block
face to the centerline of inspection hole and 1-¼
inches from the oil pan rail. There will not be any
obstruction of view from the inspection hole to view
crank and rods.
Note:
NO Aluminum harmonic balancers, must be
steel.
|
